Part Number Hot Search : 
2003M 10063 LV5693P 2SDA1 12004 BC547 LT10A04 MH381D
Product Description
Full Text Search
 

To Download UPD720102 Datasheet File

  If you can't view the Datasheet, Please click here to try to view without PDF Reader .  
 
 


  Datasheet File OCR Text:
 PRELIMINARY PRODUCT BRIEF
PD720102
USB 2.0 HOST CONTROLLER
The PD720102 complies with the universal serial bus specification revision 2.0 and open host controller interface specification for full-/low-speed signaling and Intel's enhanced host controller interface specification for high-speed signaling and works up to 480 Mbps. The PD720102 is integrated 2 host controller cores with PCI interface and USB 2.0 transceivers into a single chip.
FEATURES
* Compliant with universal serial bus specification revision 2.0 (data rate: 1.5/12/480 Mbps) * Compliant with open host controller interface specification for USB rev 1.0a * Compliant with enhanced host controller interface specification for USB revision 1.0 * PCI multi-function device consists of one OHCI host controller core for full-/low-speed signaling and one EHCI host controller core for high-speed signaling * Root hub with 3 (Max.) downstream facing ports which are shared by OHCI and EHCI host controller cores * All downstream facing ports can handle high-speed (480 Mbps), full-speed (12 Mbps), and low-speed (1.5 Mbps) transaction * Supports hyper-speed transfer mode using HSMODE signal. Transfer rate is 1.5 times higher than existing host controllers * 32-bit 33 MHz host interface compliant with PCI specification release 2.2 * Supports PCI mobile design guide revision 1.1 * Supports PCI-bus power management interface specification release 1.1 * PCI bus bus-master access * Supports 3.3 V PCI * System clock is generated by 30 MHz crystal or 48 MHz clock input. * Operational registers direct-mapped to PCI memory space * Native driver support in various operating sysytem. * 3.3 V single power supply, 1.5 V internal operating voltage from on chip regulator * On chip Rs and Rpd resistors for USB signals
APPLICATION
* CardBus card and PCI board for PC * Digital TV, DVD recorder, and STB * Digital audio system * Printer, copy and fax machine * Router, NAS (Network Attached Storage)
US B
USB application
B US
USB
B US
USB
US B
Document No. S18000EJ1V0PB00 (1st edition) Date Published March 2006 NS CP (K) Printed in Japan
2006
PACKAGE
* 120-pin plastic TQFP (fine pitch) (14 x 14)
* The information in this document is current as of March, 2006. The information is subject to change without notice. For actual design-in, refer to the latest publications of NEC Electronics data sheets or data books, etc., for the most up-to-date specifications of NEC Electronics products. Not all products and/or types are available in every country. Please check with an NEC Electronics sales representative for availability and additional information. * No part of this document may be copied or reproduced in any form or by any means without the prior written consent of NEC Electronics. NEC Electronics assumes no responsibility for any errors that may appear in this document. * NEC Electronics does not assume any liability for infringement of patents, copyrights or other intellectual property rights of third parties by or arising from the use of NEC Electronics products listed in this document or any other liability arising from the use of such products. No license, express, implied or otherwise, is granted under any patents, copyrights or other intellectual property rights of NEC Electronics or others. * Descriptions of circuits, software and other related information in this document are provided for illustrative purposes in semiconductor product operation and application examples. The incorporation of these circuits, software and information in the design of a customer's equipment shall be done under the full responsibility of the customer. NEC Electronics assumes no responsibility for any losses incurred by customers or third parties arising from the use of these circuits, software and information. * While NEC Electronics endeavors to enhance the quality, reliability and safety of NEC Electronics products, customers agree and acknowledge that the possibility of defects thereof cannot be eliminated entirely. To minimize risks of damage to property or injury (including death) to persons arising from defects in NEC Electronics products, customers must incorporate sufficient safety measures in their design, such as redundancy, fire-containment and anti-failure features. * NEC Electronics products are classified into the following three quality grades: "Standard", "Special" and "Specific". The "Specific" quality grade applies only to NEC Electronics products developed based on a customerdesignated "quality assurance program" for a specific application. The recommended applications of an NEC Electronics product depend on its quality grade, as indicated below. Customers must check the quality grade of each NEC Electronics product before using it in a particular application. "Standard": Computers, office equipment, communications equipment, test and measurement equipment, audio and visual equipment, home electronic appliances, machine tools, personal electronic equipment and industrial robots. "Special": Transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster systems, anti-crime systems, safety equipment and medical equipment (not specifically designed for life support). "Specific": Aircraft, aerospace equipment, submersible repeaters, nuclear reactor control systems, life support systems and medical equipment for life support, etc. The quality grade of NEC Electronics products is "Standard" unless otherwise expressly specified in NEC Electronics data sheets or data books, etc. If customers wish to use NEC Electronics products in applications not intended by NEC Electronics, they must contact an NEC Electronics sales representative in advance to determine NEC Electronics' willingness to support a given application. (Note) (1) "NEC Electronics" as used in this statement means NEC Electronics Corporation and also includes its majority-owned subsidiaries. (2) "NEC Electronics products" means any product developed or manufactured by or for NEC Electronics (as defined above).
M8E 02. 11-1


▲Up To Search▲   

 
Price & Availability of UPD720102

All Rights Reserved © IC-ON-LINE 2003 - 2022  

[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy]
Mirror Sites :  [www.datasheet.hk]   [www.maxim4u.com]  [www.ic-on-line.cn] [www.ic-on-line.com] [www.ic-on-line.net] [www.alldatasheet.com.cn] [www.gdcy.com]  [www.gdcy.net]


 . . . . .
  We use cookies to deliver the best possible web experience and assist with our advertising efforts. By continuing to use this site, you consent to the use of cookies. For more information on cookies, please take a look at our Privacy Policy. X